Control technology| system manual – Lenze PC-based automation User Manual

Page 42

Control technology| System manual

Commissioning of the system

General commissioning steps

DMS 1.3 EN - 02/2011

Safe data

• By means of the

»IPC Backup&Restore« program, a

copy of the Compact Flash card

can be made and saved on any En-

gineering PC for backup.

• Further information can be found

in the following documentation:

– Industrial PC parameter setting

& configuration,

–Software Manual

»IPC Backup&Restore«

Diagnostics

• The control system can be diag-

nosed by means of the "Engineer"

or "Webconfig"

–This, for instance, enables you to

have a look into the logbook of

the Industrial PC.

• If further diagnostics is required

up to the level of the field device,

also use the "Engineer" or "GDC",

depending on the field device ty-

pe, using the gateway function of

the IPC.

»WebConfig«

»Engineer«

»GDC«



Further information about the use of the single engineering tools can be found in

the corresponding software documentation.

Commissioning step

Description

Engineering tools