Lenze EMF2141IB 2141 LON - Manual (Page 30)

4 Mechanical installation
EDKMF2141 DE/EN/FR 2.0
L
30
-13- 2102LEC014
l Plug the communication module onto the controller (here: 8200 vector)
l Screw the communication module onto the device to ensure a good PE
connection.
) ) ) )
Note!
An internal supply of the communication module through the 8200 vector
is only possible if the jumper in the interface cutout (see figure above) is
changed. Please see the corresponding notes
^ 34 .
Show/Hide Bookmarks