BenQ P51 - Manual (Page 56)

44 Settings
Adding a new wireless network
You can add a new wireless network to the listbox.
1. On the Configure Wireless Networks screen, tap Add New .
2. Enter a name in Network name .
3. Next to Connects to , select where this new network will connect to ( The Internet or Work ).
4. If you want to connect to an ad-hoc connection, tap This is a device-to-device (ad-hoc)
connection .
5. If authentication information is needed, tap the Network key and 802.1x tabs to fill in the
setting values. (Check with your network administrator to obtain the setting values for your
specific wireless network.)
6. Tap OK .
Searching for wireless networks to access
Networks that you have already configured are preferred networks and are listed in the
Configure Wireless Networks screen. You can choose whether to connect only to preferred
networks.
To do so, under Networks to access , tap the type of network you want to connect to ( All
Available , Only access points , Only computer-to-computer ).
USB to PC
This option determines whether to enable advanced USB functionality when connecting to a
PC by ActiveSync. If the connection is not stable, disable this option. If the problem still
exists, disable the virus protection program and/or the firewall on the PC.
Wireless Manager
This option determines the settings to connect to a wireless network such as Bluetooth®,
Phone and WLAN.
Cell Broadcast
This option determines the SMS Cell Broadcast channels you subscribe to. Availability of
these services varies depending on your mobile phone service provider.