BenQ P51 - Manual (Page 52)

40 Settings
4. Enter any authentication information your ISP requests.
You should not need to change any settings in Advanced,
because most ISPs now use a dynamic IP address.
5. Tap Finish .
To set up a CSD connection to your ISP:
1. On the Tasks tab of the Settings page, tap Add a new modem connection under My ISP .
2. Enter a name for the connection and select your modem type. Then tap Next .
3. Enter the dial-up number of your ISP. Include any special digits such as * or # as needed. Then
tap Next .