Lenze EMF2192IB - Manual (Page 16)

Technical data
General data and operating conditions
4
l
16 EDSMF2192IB EN 3.1
4 Technical data
4.1 General data and operating conditions
Area Values
Order designation EMF2192IB
Communication profile EtherCAT
Supported device profile and
mailbox protocol CANopen over EtherCAT (CoE)
Communication medium S/FTP (Screened Foiled Twisted Pair, ISO/IEC 11801 or EN 50173), CAT 5e
Interface for communication RJ45, standard Ethernet (acc. to IEEE 802.3), 100Base−TX (Fast Ethernet)
Network topology Line, switch
Node type EtherCAT slave
Number of nodes max. 65535 (in the entire network)
Cable length between two
EtherCAT nodes max. 100 m (typical)
Cycle times 1 ms or an integer multiple of 1 ms,
max. 15 ms when "Distributed clocks" (DC) are used
Vendor−ID 0x3B
Product−ID depending on the standard device used
Revision−ID depending on the main software version of the EtherCAT module
Baud rate 100 Mbps, full duplex
Voltage supply External supply via separate external power supply unit
l Terminal "+": U = 24 V DC (20.4 V − 0 % ... 28.8 V + 0 %)
I = 140 mA
l Terminal "−": Reference potential for external voltage supply
Conformities, approvals CE
,
Documentation for Lenze series of devices 8200 vector, 9300 and ECS
Here you can find the ambient conditions and the electromagnetic
compatibility (EMC) specifications applying to the communication module.