Lenze E84Dxxxx - Manual (Page 56)

EDS84DPBUS EN 2.0 - 09/2010
L
56
Communication manual 8400 protec PROFIBUS
Parameter data transfer
DP-V1 parameter data channel (PROFIdrive profile)
8.3.4 Error codes
Error code Description Explanation Additional
info
0x0000 Impermissible parameter
number
Access to non-available parameter -
0x0001 Parameter value cannot be
changed
Change access to a parameter value that cannot be
changed
Subindex
0x0002 Lower or upper value limit
exceeded
Change access with value beyond the value limits Subindex
0x0003 Faulty subindex Access to non-available subindex Subindex
0x0004 No array Access with subindex to non-indicated parameter -
0x0005 Wrong data type Change access with value that does not go with the
data type of the parameter
-
0x0006 No setting permitted (only
resettable)
Change access with non-zero value where this is not
permitted
Subindex
0x0007 Description element cannot
be changed
Change access to a description element that cannot
be changed
Subindex
0x0008 Reserved (PROFIdrive profile V2: PPO-Write requested in the IR
is not available)
-
0x0009 Description data is not
available
Access to non-available description (parameter value
is available)
-
0x000A Reserved (PROFIdrive profile V2: Access group is wrong) -
0x000B No parameter change rights Change access if the parameter change rights are
missing
-
0x000C Reserved (PROFIdrive profile V2: Password is wrong) -
0x000D Reserved (PROFIdrive profile V2: Text in the cyclic traffic
cannot be read)
-
0x000E Reserved (PROFIdrive profile V2: Name in the cyclic traffic
cannot be read)
-
0x000F No text array available Access to non-available text array (parameter value
is available)
-
0x0010 Reserved (PROFIdrive profile V2: PPO-Write is missing) -
0x0011 Job cannot be executed due
to operating status
Access is not possible due to temporary reasons not
specified here
-
0x0012 Reserved (PROFIdrive-Profil V2: Other error) -
0x0013 Reserved (PROFIdrive profile V2: Date in the cyclic traffic
cannot be read)
-
0x0014 Value is impermissible Change access with the value that is inside the value
limits but not permissible for other permanent
reasons (parameters with defined individual values)
Subindex
0x0015 Response is too long The length of the current response exceeds the
maximally transferrable length
-
0x0016 Parameter address is
impermissible
Impermissible or non-supported value for attribute,
number of subindices, parameter number, or
subindex, or a combination
-
0x0017 Format is impermissible Write request: Impermissible or non-supported
format of parameter data
-
0x0018 Number of values are not
consistent
Write request: Number of values of the parameter
data do not match the number of subindices in the
parameter address
-