Lenze GSS User Manual
Ä.ipqä, L−force geared motors
Table of contents
Document Outline
- BA 12.0023−EN
- !
- Contents
- 1 About this documentation
- 2 Safety instructions
- 3 Product description
- 4 Technical data
- 5 Mechanical installation
- 5.1 Transport equipment for gearbox
- 5.2 Storage
- 5.3 Specified directions of rotation
- 5.4 Mounting
- 5.4.1 Preparation
- 5.4.2 General information about the assembly of drive systems
- 5.4.3 Assembly of transmission elements on solid shafts
- 5.4.4 Attachment of motors to gearboxes with bearing housing (input design N)
- 5.4.5 Coupling hubs
- 5.4.6 Attachment of gearboxes with hollow shafts and keyway
- 5.4.7 Mounting the shrink disc with a rotating cover
- 5.4.8 Mounting the fixed cover
- 5.4.9 Mounting the hoseproof hollow shaft cover
- 5.4.10 Gearboxes with breathers
- 5.4.11 Breather position, oil filling screw and drain plug
- 5.4.12 Gearbox with compensation container for mounting position C
- 6 Electrical installation
- 7 Commissioning and operation
- 8 Maintenance
- 9 Troubleshooting and fault elimination