Lenze GSS - Manual (Page 25)

Technical data
General data and operating conditions
4
l
25 BA 12.0023−EN 7.0
4 Technical data
4.1 General data and operating conditions
General data
Conformity and approval
Conformity
CE 2006/95/EC Low−Voltage Directive
Approvals
M
File No. E210321
CCC
Protection of persons and equipment
Degree of protection IEC/EN 60034−5 See nameplate
Degrees of protection only apply to horizontal installation
All unused plug−in connections must be sealed with
protective caps or dummy connectors.
Thermal class F (155 °C)
IEC/EN 60034−1 Exceedance of the temperature limit weakens or destroys the
insulation
Permissible voltage According to limiting curve A of the pulse voltage from
IEC / TS 60034−25 (image 14)
EMC
Noise emission IEC/EN 61800−3 Depending on the controller, see documentation for the
controller.
Noise immunity
Operating conditions
Ambient conditions
Climatic
Transport IEC/EN 60721−3−2 2K3 (−20 ... +70 °C)
Storage IEC/EN 60721−3−1 1K3 (−20 ... +60 °C) < 3 months
1K3 (−20 ... +40 °C) > 3 months
Operation IEC/EN 60721−3−3 Without brake −15 °C ... +40 °C
With brake −10 °C ... +40 °C
Without power reduction
> +40 °C With power reduction see,
catalogue
Site altitude < 1000 m amsl − without power reduction
> 1000 m amsl < 4000m amsl with power reduction, see
catalogue
Humidity Average relative humidity 85 %, without condensation
Electrical
Motor connection dependent on the
controller See inverter instructions
Length of motor cable
Length of cable for speed feedback
Mechanical
IEC/EN60721−3−3 3M6