Lenze GSS - Manual (Page 60)

Maintenance
Maintenance intervals
8
l
60 BA 12.0023−EN 7.0
Lubricants
Type Specification Ambient temperature Note
CLP 460 Oil on mineral basis with
additives 0 °C ... + 40 °C
CLP PG 460 Oil on synthetic basis
(polyglycol) −20 °C ... + 40 °C Do not mix with mineral
oil!
CLP HC 220 USDA H1 Food−compatible oil on
synthetic basis −20 °C ... + 40 °C Approval acc. to USDA−H1
CLP HC 320
CLP HC 220 Oil on synthetic basis
(synthetic hydrocarbon) −25 °C ... + 50 °C Can be mixed with
residual mineral oil
CLP HC 46 Oil on synthetic basis
(synthetic hydrocarbon) −40 °C...0 °C Good cold−flow behaviour
CLP PG 220 USDA H1 Food−compatible oil on
synthetic basis 20 °C ... + 40 °C Approval acc. to USDA−H1
Tab. 8 Overview of lubricant change
)
Note!
In case of ambient temperatures <−20°C or >+40°C, please contact Lenze!
Observe increased starting torques at low temperatures!
GT−GNG−002.iso/dms
Fig. 14
0 Oil sump temperature [°C] 2 Synthetic oil CLP HC/CLP PG
1 Oil life/changing intervals
[operating hours h]
3 Mineral oil CLP