1 document history, Document history, About this documentation – Lenze GSS User Manual
Page 6
About this documentation
Document history
l
6
BA 12.0023−EN 7.0
1.1
Document history
Material number Version
Description
00 390 375
1.0
11/1995
TD09
1st edition for pilot series
00 393 076
1.0
03/1997
TD09
Completely revised
00 393 076
1.0
04/2000
TD09
Addendum to Ch. 5.4.1 Preparatory work
Updated illustrations for Ch. 5.4.10 Gearbox with breather
00 407 986
1.0
12/2000
TD09
Completely revised
Revised product key and position of system blocks
Supplement with gearbox 03
Ch. 5.4.12 Gearbox with compensation container in mounting position C
Ch. Spare parts list compensation container
Changes of lubricant quantities
00 425 604
1.0
08/2001
TD09
Ch. 5.4.8 Assembly of shrink disk cover: new
Ch. 5.4.9 Assembly of hoseproof hollow shaft cover: new
Supplement with GKR 05
00 425 604
2.0
11/2001
TD09
Changes of lubricant quantities
00 460 708
1.0
12/2002
TD09
Changes of nameplates
Supplement with GKR 06
Change of company’s name
00 460 708
2.0
02/2003
TD09
00 476 711
2.1
10/2003
TD09
Changes: Product key and position of system blocks
Supplement with Ch. 8.2.2, Roller bearing grease and Ch. 8.2.3, Lubricant table
13124908
3.0
11/2005
TD09
New "geared motor" nameplate included.
Revision of the lubricant table
13166718
4.0
08/2006
TD09
Revision of the nameplate marking
New nameplate: CSA/UL version
Supplement with Ch. Mounting the shrink disc with a rotating cover
Revision of the Ch. Position of the breathing, oil filler plug and oil drain plug
Addition of the drive sizes: 3F; 4E; 6C and 7C
13290892
5.0
03/2009
TD09
Complete revision
13321528
6.0
10/2009
TD09
Conversion from G−motion to L−force Geared Motors
Supplement − Ch. Condensation drain hole
.IPQ
7.0
11/2011
TD09
Update of the lubricant table
Changed lubricant quantities for GST
Transport weights extended
Table of the roller bearing greases extended