Lenze PROFINET Controller-based Automation - Manual (Page 32)

7 Mixed operation PROFINET with EtherCAT
32
Lenze · Controller-based Automation · PROFINET® Communication Manual · DMS 1.2 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7 Mixed operation PROFINET with EtherCAT
[7-1] Example: Mixed operation of PROFINET with EtherCAT on the Lenze Controller 3221 C
Within the Lenze Controller-based Automation, PROFINET can be used in parallel to the EtherCAT
bus system. This is useful if not all devices are available for the same bus system or if EtherCAT is
required in parallel to PROFINET.

Controller-based Automation EtherCAT communication manual
Here you can find information on the commissioning of EtherCAT components.