Lenze PROFINET Controller-based Automation - Manual (Page 24)

6 Commissioning of the PROFINET
6.2 The commissioning steps in detail
24
Lenze · Controller-based Automation · PROFINET® Communication Manual · DMS 1.2 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.2.6 Creating a PLC program with a target system (Logic)
By means of the »PLC Designer« you can map the network topology in the control configuration.

Tip!
In the »PLC Designer«, PROFINET stations and stations of other fieldbus systems can be
configured.
 Mixed operation PROFINET with EtherCAT ( 32)

How to create a PLC program in »PLC Designer«
1. Use the menu command File  New project to create a new »PLC Designer« project.
2. Select "Standard project" in the New project
dialog box.
A "Standard project" simplifies the structure of a project in the »PLC Designer«; for instance,
a device tree structure with a target system, PLC logic, etc. is provided.
• Go to the Name input field and enter a name for your »PLC Designer« project.
• Select the previously created project folder as storage location in the Location
selection field.  Create a project folder ( 22)
3. Confirm the entries by clicking OK.