Lenze EZAEDE1000 - Manual (Page 19)

EZAEDE1000 DE/EN/FR/IT/ES 1.1 5
Introduction 1
1 Introduction
The Memory Module Copier, P/N EZAEDE1000, is designed to duplicate the
memory contents from a master memory module to a slave memory module. It is
compatible with the memory modules of the Lenze and Lenze-AC Tech products
listed herein.
Lenze Lenze-AC Tech
9400 Series 1 2 PositionServo (940/941)
8400 Base/State/High/Topline SMVector
8400 motec, protec SCF, TCF, SCD
smd, Tmd, Tml SCM, SCL
1 The memory module copier is able to copy 9400 Series modules of the same type (i.e. MM220 to
MM220; MM330 to MM330; etc.) It will not copy 9400 Series modules of different types ( i.e. MM220 to
MM330).
2 The memory module copier supports 9400 Series memory modules beginning with hardware version 1A
as master and slave modules. Some previous hardware versions are supported as master modules. The
hardware version is listed on the dataplate label of the memory module.
1.1 Document History
Material Number Version Description
13372655 1.0 03/2011 First edition
1.2 Identification
Figure 1 illustrates the dataplate label on the Memory Module Copier.
Made in USA
Memory
Module Copier
TYPE: EZAEDE1000
HW: 1A SW: 10
USB Power Supply: 5VDC
500mA min
Connector Type: Mini-B USB
Battery: Li-ion, 3.7VDC
2400mAh, Rechargeable For detailed information
refer to instruction
manual EDKZAEDE1000
13372523 012345678
EZAEDE1000XX1A10
ID-NO: 13372523
1.3 Scope of Delivery
Scope of delivery Important
• 1 Memory Module Copier (Type:
EZAEDE1000)
• 1 Lithium Ion 3.7VDC
Rechargeable Battery (Type:
13367797)
• 1 Mini-B USB Power Supply
(Type: 13367779)
• 1 Operating Instructions
After receipt of the delivery, check immediately whether the items
delivered match the accompanying papers. Lenze does not accept
any liability for deficiencies claimed subsequently.
Claim
•
visible transport damage immediately to the forwarder.
• visible deficiencies / incompleteness immediately to your Lenze
representative.