Lenze CS9800 Operating Instructions - Manual (Page 44)

Electrical installation
Connecting the supply and peripheral devices
UPS−PACK connection (X102)
6
l
44 BA_CSx8xx EN 3.0
6.3.4 UPS−PACK connection (X102)
Description Connection type Cable type
Terminal for Battery pack /
Capacitor pack
2−pin socket
In the scope of supply of the
pack; length 2.5 m; extension
available
IPC001
6.3.5 PS/2 interface (X108)
Description Connection type Cable type
PS/2 connection 6−pin, mini DIN
PS/2 mouse
(a keyboard and a mouse can
be connected via a PS/2 Y
cable)
IPC001
6.3.6 Serial interface (X103)
Description Connection type Cable type
6
1 RS232 connection
Pin 1: DCD
Pin 2: RxD
Pin 3: TxD
Pin 4: DTR
Pin 5: GND
Pin 6: DSR
Pin 7: RTS
Pin 8: CTS
Pin 9: RI
9−pin Sub−D plug
Control cable, shielded, with
9−pin Sub−D socket
IPC001
6.3.7 Ethernet interface (X107)
Description Connection type Cable type
Ethernet connection
10/100 Mbps
Green LED (SPEED):
on = 100 MBPS
off = 10 Mbps
Yellow LED (LINK/ACTIVITY):
on or blinking = LINK
/ACTIVITY
off = no LINK
RJ45 socket
Network cable CAT5 S/UTP or
CAT5e S/FTP (recommended),
cable length: max. 100 m
IPC001
)
Note!
If the RJ45 plug connection is exposed to oscillating or vibrating stress:
ƒ Use a strain relief in the immediate vicinity of the RJ45 socket.
ƒ Select the contact surface on which the device is mounted as fixing point of
the strain relief.
ƒ Comply with the related minimum bending radius of the cable used.