Lenze CS9800 Operating Instructions - Manual (Page 33)

Mechanical installation
Mounting steps
Removing the mounting frame
5
l
33 BA_CSx8xx EN 3.0
5.2 Mounting steps
5.2.1 Removing the mounting frame

ƒ
0
1
„
0
‚
0
2
CS57x0−004
How to proceed:
1. Lay the device flat, with the mounting frame
0 upwards, on a work surface
cushioned with a blanket.
– The work surface must be stable, sufficiently large, and free of any objects. The
touchscreen will be damaged when being laid on objects as for instance screws.
2. Remove screws from the mounting frame.
3. Open the mounting frame
0 at the top carefully until it locks and pull the earthing
cable
1.
4. Unlatch the mounting frame
0 from the attachment 2 and remove it.
Now you can mount the mounting frame to a support arm (
¶ 34) or to a wall. (¶ 35)