Lenze CS9800 Operating Instructions - Manual (Page 56)

Maintenance
Repair
Battery change
8
l
56 BA_CSx8xx EN 3.0
8.3.2 Battery change
}
Danger!
Danger of fire and explosion
On the baseboard there is a battery for buffering the clock (RTC) when the
device has been switched off.
Possible consequences:
ƒ The use of other batteries than the approved ones or improper handling can
result in a fire, explosion, or environmental damage.
Protective measures:
ƒ The battery may only be replaced by an approved battery type according to
the following list.
ƒ The battery may not be recharged or opened. Furthermore it may not be
thrown into a fire or be heated above 100 °C (212 °F).
Approved types:
ƒ Matsushita CR2450, Renata CR2450N, Sony Corp. CR2450B, Toshiba CR2450, Varta
CR2450
POWER
FAN2
FAN3
CF-CARD
RESET
USB
-μCON
BL IG HT
ACCU
CR2450
1 2
19 20
F1 T4A
CA N2
CA N2
CAN1
MC- 0
+
ELx7xx−017
How to proceed:
1. Remove the MC Card, if inserted.
2. Remove the old battery
0 from the support.
3. Insert a new approved battery 0 into the support so that the positive pole is at the
top.
According to European legislation you are obliged to dispose of batteries separately, using
the take−back systems specified.