Leica Biosystems SM2010 R - Manual (Page 16)

14 Instructions for Use V 1.4 RevC – 09/2013
Fastening the knife holder
• Press the clamping lever (66) of
the knife holder (67) downwards
and screw the bottom of the
thread (66.
1
) into one of the two
bores (64.
1
) or (64.
2
, Fig. 11 ) of the
intermediate plate (60).
66
66.1
64.1
64.2
60
67
66
Assembling the knife holder SN (continued)
4. Instrument Setup
• Continue turning the clamping
lever (66) in a clockwise direc-
tion until the knife holder is firmly
screwed on (Fig. 12).
67
60
The clamping lever (66)
has a plastic handle that
can be turned into what-
ever position is best. To
do so, pull the handle up-
wards and turn it into the
desired position (Fig. 12).
It will then lock automati-
cally when released.
The knife holder SN (67)
has two bores (64) and
thus two different mount-
ing positions for different
sectioning requirements.
Fig. 11
Fig. 12