Landoll D4P Power Ditcher - Manual (Page 11)

3-1
Chapter 3
Assembly Instructions
Assembly - Safety

CAUTION

WARNING
1. The person or persons who assemble this
machine must have the ability to read,
understand and follow the step by step
assembly procedures and safety instruction
outlined herein.
2. Assembly area should be level, clean and free
of debris to prevent assembly personnel from
tripping or falling.
3. Inspect all parts for sharp edges, grease, oil
or dirt which might cause injury during
assembly.
1. Wear personal protective equipment (PPE)
such as, but not limited to, protection for
eyes, lungs, ears, head, hands and feet when
operating, servicing or repairing equipment.
2. Use lift crane, jack, tackle or fork lift truck to
lift heavy parts and assemblies.
3. Keep clear of parts which may move or drop
when removing shipping straps or brackets.
4. If machine requires blocking up, use blocking
material of adequate strength and in good
condition. Blocks must be on a smooth dry
surface.
5. Never place any part of your body under
blocked-up assemblies.
6. If welding or flame-cutting is required, be
sure no flammable materials are in the area.
Also, clear bystanders from area.