Landoll CPP7-03 through CPP12-03 Chisel Plow - Manual (Page 15)

ASSEMBLY
2-7
Twisted Shovels
If twisted shovels are to be used, it is suggested that they
be arranged on the shanks as shown in Figure 2-7. (L.H.
means that the soil is thrown left and R.H. means that the
soil is thrown to the right.) If another arrangement is
desired, be sure that the shovels have balanced positions
from right side to left; i.e., a L.H. shovel is the same
distance from the center of the machine as a R.H. shovel
is on the opposite side. Place the plow bolts in the bottom
holes of the shovel as shown in Figure 2-6.
Figure 2-6: Twisted Shovels
Figure 2-7: Shovel Arrangement 7’ Main Frame
The shank clearance, 26”, refers to the distance from the
bottom of the straight portion of the shank to the bottom
point on a regular reversible chisel point which is new.
See Figure 2-3.
NOTE
When replacing or reversing points, change all points at
the same time so that they will have the same operating
depth. If some shanks have worn points, or points of a
different design, the chisel plow will not operate
efficiently.