Landoll FPSBT-6 Food Plot Seeder - Manual (Page 32)

4-2 2P102
PREVENTATIVE MAINTENANCE
Tires
Recommended inflation pressure is as follows:
4.80 x 12 LRC bias tire: maximum pressure is 90 PSI.
Figure 4-1 Wheel Hub
Lubrication
Lubricate bearings with quality grease per recommended
lubrication frequency intervals indicated or if machine is
not used for an extended period. Greaseable
components are the same on each side.
Lubricating Wheel Hub:
Grease Wheel Hubs every 40-60 hours.
Repack Wheel Hub bearings annually before each
season usage. See Figure 4-1.
Lubricating Disc Assemblies:
Grease Disc Gang Assembly Bearings at the start of
each work day. See Figure 4-2.
Lubricating Firming Roller Bearings:
Grease Firming Roller Bearings every 20 hours. See
Figure 4-3.

CAUTION
Figure 4-2: Lubricating Disc Assemblies
Figure 4-3: Lubricating Firming Roller Bearings
Over lubrication of these bearings can cause
premature bearing failure.