Labnet Z233M-2 High Capacity MicroCentrifuge User Manual
Page 20

20
Error no.: 82
Error no.: 82
Error no.: 82
Error no.: 82
Error no.: 82 Cutoff power board - frequency converter
Cutoff power board - frequency converter
Cutoff power board - frequency converter
Cutoff power board - frequency converter
Cutoff power board - frequency converter
Reason:
Overcurrent or undervoltage due to power supply fluctuations
Action:
Restart the unit, take care that the power supply is stable
Error no.: 83
Error no.: 83
Error no.: 83
Error no.: 83
Error no.: 83 Preset speed cannot be reached
Preset speed cannot be reached
Preset speed cannot be reached
Preset speed cannot be reached
Preset speed cannot be reached
Reason:
Preset speed cannot be reached
Action:
Call service
Error no.: 90
Error no.: 90
Error no.: 90
Error no.: 90
Error no.: 90 Emergency lid release
Emergency lid release
Emergency lid release
Emergency lid release
Emergency lid release
Reason:
Lid has been opened during centrifuge run.
Action:
Close the lid. Danger of accident!
Only open centrifuge lid when rotor stands still
Reason:
Control switch of lid lock defective
Action:
Call service