Labnet Z233M-2 High Capacity MicroCentrifuge - Manual (Page 13)

13
4.6 Preselection of brake intensity and acceleration
With the "fast/slow" key (1) you have the choice between two steps of brake and
acceleration intensity.
1
Figure 8
If the green "fast" control lamp is lit, the unit accelerates and decelerates fast.
If the green "slow"control lamp is lit, the unit accelerates and decelerates very softly
below 2 000 rpm.
Acceleration times fast / slow in seconds: Acceleration times fast / slow in seconds: Acceleration times fast / slow in seconds: Acceleration times fast / slow in seconds: Acceleration times fast / slow in seconds:
Rotor C0200-95 Rotor C0230-43A
18 x 1.5ml 64 x .05ml
(10 / 29) (15 / 25)
9 / 20 17 / 25
Rotor C0230-2A Rotor C0230-9A and C0230-55A
24 x 1.5ml 44 x 1.5ml and 24 x 1.5, 24 x.05ml
(10 / 20) (15 / 25)
15 / 26 17 / 25
Deceleration times fast / slow in seconds: Deceleration times fast / slow in seconds: Deceleration times fast / slow in seconds: Deceleration times fast / slow in seconds: Deceleration times fast / slow in seconds:
Rotor C0200-95 Rotor C0230-43A
18 x 1.5ml 64 x .05ml
(9 / 13) (16 / 27)
11 / 18 19 / 34
Rotor C0230-2A Rotor C0230-9A and C0230-55A
24 x 1.5ml 44 x 1.5ml and 24 x 1.5, 24 x.05ml
(13 / 23) (16 / 27)
15 / 28 19 / 34
The numbers in brackets for 220V/50-60Hz
Non brackets numbers for 120V/50-60Hz
fast slow
preset
speed
2000 rpm