Labnet Z233M-2 High Capacity MicroCentrifuge - Manual (Page 10)

10
4. 4. 4. 4. 4. Operation Operation Operation Operation Operation
4.1 Power
You can switch on the centrifuge by plugging in the power supply. The digital
indications on the display will light up when the power is on.
4.2 Lid release
When the green control lamp of the "lid" key (1) lights, the rotor is not moving and
the centrifuge lid is ready to open.
Press the "lid" key (1) (see figure 5) to open the lid. The green control lamp(2) will
extinguish as soon as the lid is opened or the unit started.
2 1
Figure 5
4.3 Lid lock
Close the centrifuge lid, after the rotor has been fixed correctly as described.
The centrifuge can only be started when the lid is closed correctly.
The green control lamp of the "lid" key will light as soon as the lid is closed correctly.
When the rotor starts accelerating the control lamp of the "lid" key extinguishes and
the lid cannot be opened.
Z233M-2