Labnet Z233M-2 High Capacity MicroCentrifuge - Manual (Page 14)

14
4.7 Keyboard - Starting the centrifuge - "quick"-key
1 "Lid" key: To open the centrifuge lid.
If the green LED of the "lid" key is lit,
the lid is closed correctly.
2 "Quick" key: For short time runs.
3 "Start" key: To start the centrifuge.
4 "Stop" key: To stop the centrifuge
befor the preset operating time has
expired or to stop the centrifuge
during a continuous run.
Figure 9
Starting the centrifuge Starting the centrifuge Starting the centrifuge Starting the centrifuge Starting the centrifuge
The rotor has to be fixed correctly and completely loaded. Close the centrifuge lid.
As soon as the green LED of the "lid" key is lit the centrifuge can be started. Then
press the "start" key.
"quick" - key - Short time runs
For short centrifuge runs you can start the run with the "quick" key. Press the
"quick" key. The centrifuge starts and keeps running as long as you press the
"quick"-key. The operating time will be indicated in seconds on the digital "time"
display.
4.8 "Stop" key
Press the "stop" key if you want to interrupt a centrifuge run. The centrifuge
decelerates according to the adjusted brake intensity. You can change the brake
intensity during deceleration.