Brother HL 4040CN - Manual (Page 48)

Wireless configuration for Windows ® using the Brother automatic installer application
41
4
Connected
is displayed when the print server is successfully connected to your router or access
point. You can now use your printer in a wireless network.
Connection NG
is displayed when the print server has not successfully connected to your router
or access point. Try starting from a again. If the same message is displayed again, reset the print
server back to the default factory settings and try again.
Note
If the LCD shows Connection NG, please try again.
m Click Next or Finish.
You have completed the wireless setup. If you chose to install the printer driver in step g, Go
to the next step.
n Check the box after you confirm that you have completed the wireless settings, and then click Next.
Go to Installing the printer driver on page 64.