Brother HL 4040CN - Manual (Page 122)

Control panel setup
115
10
„ SSID
This field displays the current wireless network SSID.
a Press the + or - button to select LAN. Press OK.
b Press the + or - button to select WLAN. Press OK.
c Press the + or - button to select WLAN Status. Press OK.
d
Press the + or - button to select SSID. Press OK.
e
The current wireless network SSID will be displayed.
f
Press back.
Note
This menu only appears when Status is Active (11b)or Active (11g) for the wireless network.
„ Comm. Mode
This field displays the current wireless network communication mode; Ad-hoc or Infrastructure.
a Press the + or - button to select LAN. Press OK.
b Press the + or - button to select WLAN. Press OK.
c
Press the + or - button to select WLAN Status. Press OK.
d
Press the + or - button to select Comm. Mode. Press OK.
e
The current wireless network communication mode will be displayed; Ad-hoc or Infrastructure.
f Press back.
Note
This menu only appears when Status is Active (11b)or Active (11g) for the wireless network.
Set to Default
10
You can restore the WLAN menu settings to factory default.
WLAN Enable
10
You can enable and disable the wireless network connection by selecting On or Off.