Brother HL 4040CN User Manual
Network user’s guide
NETWORK
USER’S GUIDE
Multi-Protocol On-board Ethernet Print Server and Wireless
(IEEE 802.11b/g) Ethernet Print Server
HL-4040CN
HL-4050CDN
HL-4070CDW
Please read this manual thoroughly before using the printer.
Keep the CD-ROM in a convenient place so you can use it quickly
if you need to.
Please visit ushere you can get
product support, the latest driver updates and utilities, and
answers to frequently asked questions (FAQs) and technical
questions.
Note: Not all models are available in all countries.
Version B
EN
This manual is related to the following products:
Table of contents
Document Outline
- Network User's Guide
- Definitions of warnings, cautions, and notes
- Trademarks
- Compilation and publication notice
- IMPORTANT NOTE:
- Brother Numbers
- Table of Contents
- 1 Introduction
- 2 Configuring your printer for a network with an Ethernet cable connection
- 3 Configuring your printer for a wireless network (For HL-4070CDW)
- Overview
- Confirm your network environment
- Wireless network terms and concepts
- Configuring your printer for a wireless network
- Changing the print server settings
- 4 Wireless configuration for Windows® using the Brother automatic installer application
- 5 Wireless configuration for Macintosh® using the Brother automatic installer application
- 6 Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- 7 Network printing from Windows®: NetBIOS Peer-to-Peer printing
- 8 Internet printing for Windows®
- 9 Network printing from Macintosh®
- 10 Control panel setup
- 11 Driver Deployment Wizard (Windows® only)
- 12 Security features
- Overview
- Managing your network printer securely
- Printing documents securely using IPPS
- Using E-mail notification with user authentication
- Creating and installing a certificate
- 13 Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the Telnet console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS* to configure the IP address
- Appendix B
- Appendix C
- Index