Brother HL 4040CN - Manual (Page 104)

Network printing from Windows ® : basic TCP/IP Peer-to-Peer printing
97
6
Printer driver already installed
6
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a For Windows Vista™:
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
For Windows
®
XP and Windows Server
®
2003:
Click the Start button and select Printers and Faxes windows.
For Windows
®
2000:
Click the Start button and select Settings and then Printers.
b
Right click on the printer driver you wish to configure, and then select Properties.
c
Click the Ports tab and click Add Port.
d Select the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the
New Port... button.
e
The Standard TCP/IP Port Wizard will start.
f Enter the IP address of your network printer. Click Next.
g Click Finish.
h Close Printer Ports and Properties dialog box.
Other sources of information
6
See Chapter 2 of this User’s Guide to learn how to configure the IP address of the printer.