Using the setup wizard from the control panel, Printer – Brother HL 4040CN User Manual
Page 35
Configuring your printer for a wireless network (For HL-4070CDW)
28
3
Using the Brother automatic installer application on the CD-ROM to configure
your wireless network printer
3
We recommend that you use the Brother automatic installer application on the CD-ROM we have provided
with the printer. For installation, see Wireless configuration for Windows
installer application on page 37 or Wireless configuration for Macintosh
using the Brother automatic installer
Using the Setup Wizard from the control panel
3
You can configure your print server by using the Setup Wizard function. This is located in the LAN menu on
the printer’s control panel. See the steps below for further information:
a
Press any of the Menu buttons (+, -, OK or Back) on the control panel of your printer to take the printer
off-line.
Ready
h
Select
ab or OK
Machine Info.
b
Press the + or - button to select LAN.
Select
ab or OK
LAN
c
Press OK to move to the next menu level.
LAN
Wired
d
Press the + or - button to select WLAN.
LAN
WLAN
e
Press OK to move to the next level.
WLAN
TCP/IP
f
Press the + or - button to select Setup WLAN.
WLAN
Setup WLAN
g
Press OK to move to select the next level.
Setup WLAN
Setup Wizard
h
Press the + or - button to select Setup Wizard, then press OK.
Setup WLAN
Setup Wizard