Problem solution – Brother TD4100N User Manual

Page 36

STEP3 Reference

When printing via the USB

cable, the printer repeatedly

pauses and then continues

printing.

• Is the printer set for sequential printing?

For Windows

XP:

If so, set print mode to buffered printing. (Open the printer

properties from [Control Panel] - [Printer and other hardware] -

[Printer and Faxes] and click [Printing Preferences...] button in

the [General] tab. Click the [Other] tab and choose the option

"After one page of data is received".)

For Windows Vista

If so, set print mode to buffered printing. (Open printer properties

from [Control Panel] - [Hardware and Sound] - [Printers] and click

[Printing Preferences...] button in the [General] tab. Click the

[Other] tab and choose the option "After one page of data is

received".)

For Windows

If so, set print mode to buffered printing. (Open printer properties
from

- [Devices and Printers], right-clicking the printer whose

settings are to be changed, and selecting [Printing preferences].
Choose the option "After one page of data is received".)

• An alternative solution is to disconnect the LAN cable until USB

printing is completed.

An error occurred when the roll

cannot be fed to the beginning

of the label.

• The procedure for feeding to the beginning of the label is

different for die cut labels and continuous length label. See

• When using die cut labels with a length of 6" (152.4mm) inches

or more, an error may occur if the TD-4000/4100N cannot

detect the beginning of the label after the first time that the roll

is fed. To clear the error, press the Feed button again.

Problem

Solution

This manual is related to the following products: