JUMO 706030 LOGOPRINT 500 Printing Recorder External Relay Module/Logic Module Operating Manual - Manual (Page 14)

Relay outputs
- changeover contact
- contact rating: 230V AC 3A, resistive load
- 10
6
operations at rated load
- contact protection circuit between common and make contact
(15nF/56

Logic outputs: 12 V/20 mA with internaly bridged ground
Power consumption: 8VA approx.
Electrical connection
screw terminals for wire /stranded wire with 2.5mm
2
max.

conductor cross-section
Permitted ambient temperature range: 0 to 50°C
Permitted storage temperature range: -40 to 70°C
Climatic conditions: rel. humidity < 75% annual mean, no condensation
Protection: IP20 to EN 60529
Electrical safety
to EN 61010-1
- pollution degree 2
- overvoltage category II
Electromagnetic compatibility
to EN 61000-6-2 and EN 61000-6-4
Immunity to interference: Industrial requirements

Interference emission: Class A - Only for industrial use -
Housing: polycarbonate
Mounting position: vertical
Weight: 400 g approx.
Mounting to EN 60715
- DIN rail 35x7.5mm
- DIN rail 15mm
- G-rail
Supply
110 — 240V AC +10/-15 %, 48 — 63Hz
20 — 53 V AC/DC, 48 — 63Hz
Serial interface: maximum length of cable: 5m
Technical data 5