JUMO 14597 safetyM TB/TW08 Temperature Limiter and Temperature Monitor Data Sheet - Manual (Page 3)

2012-07-01/00524703
Data sheet 70.1170 JUMO GmbH & Co. KG • 36035 Fulda, Germany Page 3/10
Analog output
Binary input
Relay outputs
Voltage supply
Approval/approval marks
Switching behavior inverse (ex-factory)
Type of signal Accuracy Residual ripple Load influence Temperature coeffi-
cient Load resistance
Current 4 ... 20 mA
≤
0.5 % ± 0.5 % ± 0.01 mA 80 ppm/K
≤
500
Ω
0 ... 20 mA
Voltage 2 ... 10 V
≤
0.5 % ± 0.5 % ± 15 mV 80 ppm/K
≥
500
Ω
0 ... 10 V
Connection Function
1 potential-free contact Unlocking, keyboard locking, level locking can be configured
Relay output KV Relay (N/O) without shroud
Contact rating of 3A /230V, 50 Hz ohmic load
Relay output K1 100000 operations at a performance of 3A /230V, 50Hz resistive load
Contact protection switching:
Fuse cut-out 3,15AT installed in the device
Voltage supply AC/DC 20 ... 30V, 48 ...63 Hz, AC 110 ... 240V +10% /-15%, 48 ... 63Hz
Power consumption < 15 VA
Approval
marks Inspection authority Certificates/inspection
numbers Inspection basics valid for
DIN DIN CERTCO TW/TB 1219 DIN EN 14597 all device versions
c UL us Underwriters Laboratories - UL 60730-2-9
submitted all device versions
ALLO
AL
ALHI
Hys1
Hys2
S
P
Ö
3,15A
5 7 6
S
P
5 7 6
Ö
3,15A
Relay output KV
LED KV lights up yellow active
Relay output KV inaktive
LED KV off
Relay inaktive
LED K1 lights up red
Relay K1 aktive
LED OK
green lights up
Pre alarm range
Pre alarm
Measured Value
Measured Value
Limit Value
Alarm range Valid range