JUMO 605041 Explosion-protected surface-mounting thermostat, ATH-EX Operating Manual - Manual (Page 13)

13
3 Mounting
3.5.2 Probe mountings 10, 21, 60, 65
Material stainless steel or brass, according to choice
Loading only for use in unpressurized media
*depending on the control range
3.6 Mounting the probe
Probe mounting 60, 65 10, 21
Maximum temperature 200°C* 500°C*
The temperature probe (2) must be immersed in the medium for its entire
length, otherwise there will be appreciable deviations from the switching point.
In the case of probe mountings "20", "21", "22" and "23", the temperature
probe is secured in the pocket by a clamping clip (1).
( 1 )
( 2 )