JULABO LH 50 Highly Dynamic Temperature Control Systems User Manual
Page 52

Menu functions
52
8.4. Integrated
programmer
The integrated programmer allows any desired temperature
program sequences to be realized. Such a temperature sequence
is called profile. A profile consists of individual sections defined
by duration (t:) and target temperature. Target temperature is the
setpoint (T:), that is achieved at the end of a section. The
programmer uses time and temperature difference values within a
section to calculate a temperature ramp.
Press enter
to select the submenu "Int. Programmer".
Use the up/down cursor keys
to select the desired
option. Then press enter
to open.
A flashing segment indicates that a number or value needs to
be entered.
Edit Compile
profiles
Display
sections
Delete
Delete sections
Set clock
Set the real time on the instrument
Examples:
Setting clock
The integrated clock allows starting a profile at any date and time.
The clock is preset in the factory.
Lines 1 to 3:
Check for correctness of the preset date and time and correct
if necessary.
The time is diplayed permanently in line 4.
Use the numerals to set time, date and year and set each
entry with enter
.
Press escape
to return to the previous menu level.