JULABO ME-18V Visco-Baths - Manual (Page 9)

ME
9
2.4. Technical specifications
Visco Baths ME-31A ME-16G ME-18V
Working temperature range °C 20 ... 60 20 ... 100 20 ... 150
Temperature stability °C ±0,01 ±0,01 ±0,01
Bath opening
(9x9 cm or dia. 5,1 cm 3 pc ---- 2 pc
(7,6x7,6 cm or dia. 5,1 cm) ---- 2 pc ----
Bath depth cm 37 31 37
Filling volume from ... to liters 25 ... 31 13 ... 16 15 ... 18
Overall dimensions (WxDxH) cm 50x20x56
29x48
36x24x53
Weight kg 11 9 17
All measurements have been carried out at: rated voltage and frequency
ambient temperature: 20 °C bath fluid: water
operating temperature: 70 °C
Technical changes without prior notification reserved.
ME
Mains power connection 230 V/50 Hz V/ Hz 190 ... 253 / 50-60
Current draw (at 208 V / 230 V) A 8 / 9
Mains power connection 115 V/60 Hz V/ Hz 90 ... 127 / 50-60
Current draw (at 100 V / 115 V) A 8 / 9
ME
Temperature selection digital
via keypad indication on VFD COMFORT-Display
remote control via personal computer indication on monitor
Temperature indication VFD COMFORT-DISPLAY
Resolution °C 0.01
Absolute Temperature Calibration INT/EXT °C ±3 / ±9
Temperature control PID3 cascade temperatur control
Heater wattage (at 230 V) kW 2,0
Heater wattage (at 115 V) kW 1,0
Electronically adj. pump capacity stages 1 ... 4
Flow rate at 0 bar l/min 11 ... 16
Pressure max. at 0 liter bar 0.22 ... 0.45
Electrical connections:
External alarm device Vdc/mA 24-0 / max. 25
Computer interface RS232
External temperature sensor Pt100
Ambient temperature °C 5 ... 40