JULABO ME-18V Visco-Baths - Manual (Page 34)

Menu functions
34
9.4. MENU CONFIG – Configuration of unit
Menu level 1


A RESET can be effected only in the >OFF< mode.
Switch off circulator by pressing the key and call up the menu
CONFIGURATION.
Level 2 Parameter level 
Press the key if a parameter is to be
retained. Correction function for parameters and
values (prior to OK).

or

Switch on and off remote control by pressing
and

Control display in the topline
for Remote

For remote control refer to 54

Connect RS232 with PC.

or

Switch on and off autostart by pressing
and
AUTOSTART on = on
AUTOSTART off = off
See WARNING page 35

or

Switch on and off OFFMODE by pressing
and
PUMP ON continuous operation of circulating pump
PUMP OFF circulating pump is linked to Start/Stop
Level 3 Parameter level



Hours flash, set by pressing
+

Minutes flash, set by pressing
+


Day flashes, set by pressing
+

Month flashes, set by pressing
+