JULABO ME-18V Visco-Baths - Manual (Page 36)

Menu functions
36
interface.
If such a safety standard is not required, the NAMUR recommendations
can be bypassed with the AUTOSTART function thus allowing a direct
start of the circulator by pressing the mains switch or using a timer.
9.4.3. OFF-MODE
Factory setting:
PMP
OFF
Usually the circulating pump is controlled with the key
or the
start/stop command. If the circulating pump is to work in the –OFF-
mode, the adjustment can be set in a sub-menu.

The pump motor will be shutdown in case of alarm anyhow.
9.4.4. Setting of clock and date
The internal real time clock allows starting a program any time. The clock
is set to the local mean time (MEZ) at the factory.

If the unit is operated in a different time zone, the clock can be
adjusted in this menu.

Change summer/winter time in this menu
9.4.5. RESET – Factory settings
A Reset will return all values to factory setting except for date and time.

A RESET can be effected in the >OFF< mode only.
Switch off the circulator by pressing the key and call up the
menu CONFIGURATION.