JULABO ME-18V Visco-Baths User Manual
Page 43
![background image](/manuals/563251/43/background.png)
ME
43
Menu level 1
Level 2
Parameter level
Press the
key if parameter is to be retained.
Correction function for parameters or values (prior
to OK).
or
The parameter flashes, switch by pressing
and
On level 2 a (I) is indicated for internal or an (E)
for external.
Example:
or
The parameter flashes, switch by pressing
and
>NO<
Carry out an ATC calibration
>YES<
return to standard operation after
calibration.
The parameter flashes, switch by pressing
and
A >1-point<, >2-point< or >3-point< calibration
can be carried out.
The selected calibration is indicated on level 2 by 1 or
2 or 3.
The value >TMPVAL< is only indicated
In addition the measured temperature value
>CALVAL X< is saved during the next step.
Integer digits flash, set by pressing
+
Decimal digits flash, set by pressing
+
If only a 1-point calibration is carried out, the following menu items are not
indicated anymore