JULABO ME-18V Visco-Baths - Manual (Page 28)

Menu functions
28
9. Menu functions

Menu level 1
The term „Menu functions“ refers to settings such as

Start program Page 29
Administration and creation of programs Page 31
Electronically adjustable pump capacity Page 33
Configuration of the unit Page 34
REMOTE – on / off (remote control via RS232)
AUTOST – AUTOSTART on / off
OFF-MODE – pump on / off
TIME / DATE – setting time and date
RESET – factory settings
Control characteristics and parameters Page 37
C-TYPE – Internal or external control
DYNAMICS - internal
Control parameter - XP-, TN-, TV- INTERNAL
Control parameter - XP-, TN-, TV- XPU-, EXTERNAL
Adjustable interface parameters Page 41
BAUD RATE, PARITY, HANDSHAKE
ATC - Absolute Temperature Calibration, Page 42
Sensor calibration INTERNAL SENSOR,
Sensor calibration EXTERNAL SENSOR
3-point calibration
Limitations of temperature and capacity Page 48
SETPOINT MAX / MIN - Maximum and minimum setpoint
HEAT MAX – Set maximum heating
COOLING MAX – Set maximum cooling
INTERN MAX / MIN – Limitation of the temperature range
BAND HIGH / LOW – Band limit
1. Open the menu by pressing the key.
2. Use the keys to scroll in menu level 1.
3. Press the key to change to menu level 2.
Press the key if settings are to be retained.