JULABO ME-18V Visco-Baths - Manual (Page 19)

ME
19
ME-18V
 ME-18V
Slide a short piece of tube onto the drain port (20)
and hold it into a pail.
Unscrew the drain tap (21) and empty the unit
completely.
Tighten the drain tap
5.4. Countercooling
Notice:
Securely attach all tubing to prevent slipping.
Observe the laws and regulations of the water distribution company valid in the
location where the unit is operated.
For applications near the ambient temperature, the cooling coil must
be connected to the water mains.
 Using tubing, connect the cooling coil (25 / exemple ME-16G) to
the tap water supply, and lead the tap water in a sink through the
return connector.

A specific water flow rate of 100 ml/minute is sufficient to
compensate for the characteristic temperature.

For applications near ambient temperature (20 °C), the cooling
water temperature should at least be 5 °C below the working
temperature.