JULABO SL-26 Heating Circulators - Manual (Page 33)

HL / SL
33
Level 2 Parameter /Value
or


Set desired parameters with
and .
Confirm >now< with the key and the
program will start immediately
or
start at the set time under parameter (time ).
Set time in the example below:
09. August 2009, 11:15 hrs
Submenu TIMER If the parameter time is selected, a further
submenu opens for setting the start time.
Set the time for the start of the program in the
submenu >3 TIMER<.

Set starting time using the numeric
keypad and confirm by pressing .
Example: (hh:mm)
+

Set day and month using the numeric
keypad and confirm by pressing .
Example: (TT/MM)
+

Set year using the numeric keypad and
confirm by pressing .
Example: (JJJJ)
+
Confirm >Starten/Start?< by pressing
and the program starts at the set time.
Display of waiting time until start:
The unit switches to waiting mode and a flashing line “wait” appears on
the LCD DIALOG-DISPLAY. The start time and current time are
permanently indicated on the display.
It might be necessary to check the correct setting of the internal real time
clock
(see MENU configuration)