Intelix DIGI-P122 - Manual (Page 24)

DIGI-P122 / DIGI-P123 Installation Guide
Audio Performance
RCA/3.5mm Input Signal Level -10dBv Nominal
RCA/3.5mm Input Impedance >10k ohm
MIC Input Signal Level -48dB Nominal (Mic input), +4dBu Nominal (Line Input)
MIC Input Impedance 600 ohm (Mic input), >10k ohm (Line input)
ADC Format 24bit, 48kHz, 2ch LPCM
Line Level Output Impedance 50 ohm
Speaker Output 2x10W @ 8ohm / 2x20W @ 4ohm
Frequency Response 20Hz-20kHz
Stereo Channel Separation >80dB @ 1kHz
Common Mode Rejection >90dB @ 20Hz-20kHz
Control Parameters
RS232 9600 baud
Ethernet 100BaseT
Chassis and Environmental
Enclosure Painted Aluminum
Dimensions 483mm x 235mm x 44mm (19 in x 9.25 in x 1.73 in) – 1RU
Shipping Weight 3.74 kg (8.25 lbs.)
Operating Temperature 0° to +48° C (+32° to +120° F)
Operating Humidity 10% to 90%, Non-condensing
Storage Temperature -20° to +70° C (+14° to +158° F)
Storage Humidity 10% to 85%, Non-condensing
Power and Regulatory
Maximum Power Consumption 65 watts
Power Supply 100vAC~240vAC, 50/60Hz
Regulatory CE, RoHS
Other
Warranty 2 years
Included Accessories IR Remote, Power Cable, Four (4) Rubber Feet, Serial Cable (DE9-F to
Euroblock), Operation Guide
**VGA Output will turn off when encrypted content is selected.
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.
24