Intelix DIGI-P122 - Manual (Page 10)

DIGI-P122 / DIGI-P123 Installation Guide
To change the volume of the MIC or LINE audio from the IR remote:
1. Point the IR remote at the IR window on the front panel of the DIGI-P122/123.
2. Press the + or - buttons to raise or lower the volume, respectively. To make a large
change, you can press and hold the button until it reaches an appropriate level.
CAUTION: Increasing volume level too much can cause distortion or feedback, damage
speakers, and/or cause hearing loss.
To change the mute status of the MIC and LINE audio from the IR remote:
1. Press the MUTE button – this will mute both the MIC and LINE audio.
2. To cancel the mute, you can press the MUTE button again, or press the + or – buttons for
MIC or LINE (only the MIC or LINE will unmute this way, depending on which buttons you
press).
See Page 8 for the button layout of the IR remote.
10