Product overview – Intelix DIGI-P52 User Manual
Page 6
DIGI-P52 Installation Guide
6
The Intelix DIGI-P52 allows the integration of multiple analog and digital devices into a high-definition
environment. Mounting options include under table or resting on a shelf.
The DIGI-P52 allows selection of five different sources, and will simultaneously scale the selected video
to HDMI and HDBaseT outputs. The unit features three HDCP compliant HDMI inputs and two VGA inputs
with discrete analog audio inputs for each input connection. The VGA inputs can be configured to support
YPbPr (component video), YC (S-video), and C (composite video) video formats. There are seven fixed output
resolutions to pick from, and several aspect ratio modes, which will ensure your content is displayed properly.
The HDBaseT output will allow you to extend audio, video, and control signals up to 60m away.
The DIGI-P52 offers unique audio options designed to simplify your installation. All audio inputs are embedded
into the HDMI and HDBaseT streams, so you can use your display speakers for audio. Additionally, the line
level output can be used for reinforcement. A balanced input is provided (line or microphone level) which is
mixed with the source audio to provide voice lift capabilities; while the volumes of the mic and source can be
individually controlled.
The DIGI-P52 can be controlled in many different ways. When the VGA inputs are defined as PC signal inputs,
the DIGI-P52 can be configured to automaticcaly switch to a device once connected to the switcher. The front
panel offers source selection, output resolution, and volume control. Third party control systems can utilize
RS232 rear panel, RS232 extended (with a compatible HDBaseT receiver), and rear panel IR control. CEC
enabled source devices can be controlled from a CEC enabled display.
Product Overview