Intelix DIGI-P52 - Manual (Page 21)

DIGI-P52 Installation Guide
21
Menu Navigation
The menu system of the DIGI-P52 provides a wide array of options to customize the installation of the product
regardless of customer needs.
Upon entering the menu, navigating left or right will provide four different submenus: Options, Picture, Sound,
and Setup. Pressing ENTER on the front panel or OK on the remote will cycle through options or enter another
menu if multiple configuration settings are available.
Options Menu
Output Adjust
Analog Video Input Configuration
HDMI Audio Configuration
Software Update
The Options menu features output image adjustment, analog video input configuration, HDMI audio
configuration, and software update.
Selecting Output Adjust will open another menu which will change the verticle and horizontal position, width,
and height of the output image. The default value is Off. Pressing right or left will cycle to On. Values range from
0 to 100. Pressing MENU will exit the submenu.
Off On
Position X 50 Position X 0-100
Position Y 50 Position Y 0-100
Width 50 Width 0-100
Height 50 Height 0-100
Pressing ENTER or OK will cycle the analog video input modes: VGA, YPbPr (component video), and AV
(composite video).
Pressing ENTER or OK will cycle the HDMI audio modes: Embedded or Line (analog audio input).
A separate document will provide usage instructions once a new software update is available.