Intelix DIGI-P52 - Manual (Page 14)

DIGI-P52 Installation Guide
14
Connect Microphone Input (Optional)
Connect Audio Output (Optional)
Insert the removable 3-pole terminal block to the MIC
input terminal.
If the analog audio output is to be used in the installation,
connect the Left, Right, and ground reference wires to the
removable 3-pole terminal block.
Set the MIC switch to the proper setting for the microphone
input source.
48V 48V phantom power
MIC No phantom power
LINE No gain needed
Insert the removable 3-pole terminal block to the output
zone terminal.
L
R
L+
L-
R-
R+