Intelix DIGI-P52 - Manual (Page 35)

DIGI-P52 Installation Guide
35
Control Parameters
RS232 Baud 9600 baud
HDBaseT Signal Characteristics
Maximum Distance 60 m
Cable Requirements Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp
pattern
Bandwidth 10.2 Gbps
Gain 0 dB – 10 dB at 100 MHz
Signal to Noise Ratio (SNR) > 70 dB at 100 MHz over 100 m
Return Loss < -30 dB at 5 KHz
Total Harmonic Distortion (THD) < 0.005% at 1 KHz
Min-Max Signal Level < 0.3 V – 1.45 Vp-p
Differential Phase Error ±10° at 135 MHz over 100 m
Chassis and Environmental
Enclosure Painted Aluminum
Dimensions 44 mm x 220 mm x 148 mm (1.73 in x 8.66 in x 5.83 in) – 1RU
Shipping Weight 0.67 kg (1.48 lbs.)
Operating Temperature 0° to +48° C (+32° to +120° F)
Operating Humidity 10% to 90%, Non-condensing
Storage Temperature -20° to +70° C (+14° to +158° F)
Storage Humidity 10% to 85%, Non-condensing
Power and Regulatory
Power Supply Input 100V-240VAC / 50-60 Hz / 0.8A
Power Supply Output 12VDC / 2.0A
Power Consumption 24 watts (max)
ESD Protection ±15 kV
Product Regulatory FCC, CE, RoHS
Power Supply Regulatory UL, CUL, CE, PSE, GS, RoHS
Other
Warranty 2 years
Included Accessories IR Remote, IR Receiver, Wall Mount Power Supply, Power Supply Adapters (US,
EU, UK, AU), Four (4) Rubber Feet, Serial Cable (DE9-F to Euroblock), Seven (7)
3-Pole/3.5mm Euroblock Connectors (installed on product), Two (2) FLX-RBOCA
Cables (40 mm (15.75 in.) Male HD15 to Three (3) Female RCA Connectors (Red,
Green, Blue)), Two (2) Mounting Rails with Chassis Screws, Installation Guide
Compatible Receivers (A/V Only) DIGI-HD70-R
Compatible Receivers (A/V and Control) DIGI-HDE-R, DIGI-HDX-R, DIGI-HD60C-R, FLX-BI4
Compatible Receivers (A/V and PoE) DIGI-HD60-R
Compatible Receivers (A/V, Control and PoE) DIGI-HDX-R, DIGI-HD60C-R
Optional Accessories (sold separately) IR Transmitter (DIGIB-EMT)
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable
patches.