Heidolph SilentCrusher S - Manual (Page 38)

38
E
Dispersing Tool 7 F
Characteristics Values
Part Number 596-07010-00
Stator Diameter [mm] 7.0
Rotor Diameter [mm] 3,9
Gap Width Stator /Rotor [mm] 0.55
Width of Slit [mm] 0.6
Total Shaft Length [mm] 55
Immersion Depth max. [mm] 44
Immersion Depth min. [mm] 23
Volume [ml] 6 - 10
liquid level max. in test tube [mm] 50
liquid level min. in test tube [mm] 33
Peripheral Speed [m/sec]
5.5 - 17.7
Initial Particle Size [mm] < 0.4
Material PTFE / 1.4435
Vessel PP – 20ml test tube
Internal Vessel Diameter [mm] Ø 18.3
Outer dimensions [mm] Ø21 x 96
Sterilization Up to 130°C with wet chemicals; up to 180°C dry
WARRANTY, LIABILITY AND COPYRIGHTS
Warranty
Heidolph Instruments warrants the products described here (except for wear parts) for
three years from delivery from the manufacturer’s warehouse. This warranty covers
defects in materials and manufacturing.
Transportation damages are excluded.
For warranty claims, contact Heidolph Instruments (Tel.: (+49) 9122 - 9920-68) or your
Heidolph Instruments dealer. If it involves a defect in materials or manufacturing, the
device will be repaired or replaced under the warranty, free of charge.
Heidolph Instruments does not cover damage caused by improper handling.
Heidolph Instruments must confirm any change in this warranty in writing in each individual
case.
Disclaimer of Liability
Heidolph Instruments does not accept any liability for improper handling and use of this
device. Consequential damages are excluded.