Heidolph SilentCrusher S - Manual (Page 25)

25
E
Repairs may be made only by a Heidolph Instruments authorized technician.
Caution when used near easily inflammable and explosive materials. Please read
the safety data sheets. The motors are designed to operate without sparking but
the device is not protected from explosion.
Connect the disperser to a grounded mains socket only.
Make sure the device is placed on a stable surface.
When operating, wear suitable clothing and eye protection.
Caution: The tool and fluid for dispersion are heated by the energy input.
ASSEMBLY
Caution: Never operate the SilentCrusher S with dispersion tool when the
dispersion tool is not immersed in fluid. Operating the device dry will destroy the
PTFE bearing (Q, see Chapter 6.2-Cleaning and Maintenance) and the rotor (O,
see Chapter 6.2-Cleaning and Maintenance).
Place the drive unit (A) on the laboratory table. Connect the power supply (unit) (B) to the
small coaxial plug (C) on the drive unit (A).
Connect the power connection cable (D) to the receptacle (F) using the plug (E).