Network interface software update, 2 network interface software update – GeoDesy Gigabit AF with auto failover User Manual
Page 33
GeoDesy Kft.
Telefon: 06-1-481-2050
Fax.: 06-1-481-2049
E-mail: [email protected]
http://www.geodesy-fso.com
33
7.2 Network Interface software update
1. Connect the RJ11 and RS232 cable (update cabel)
between the laser head and the PC.
2. Enter into the management of the laser head and into the device info.
4.Click on the „Update” button.
5.Click on OK button.
6. Start the Total Commander program and start PIC32.exe program.
7. Choose COM1 port.
8.Click ont the Connect button.
9.Click on Erase button.